#40 Horizontal Machining Center (Inline Type/MBN Series)

• MBN-450HQ2 Quill Type

  

  A global standard machining center achieves a high utilization rate because it reduces failures caused by grinding swarf and can accommodate a variety of feeding methods.

  Maximum spindle speed	12,000 min-1
  Travel distance	X:500 mm Y:500 mm Z:500 mm
  Spindle taper	7/24 taper No. 40
  Numerical control device (NC)	FANUC 0i-MD

• MBN-450Hα High Performance Type

  

  Reduces non-cutting time and can be used in multiple locations, either on an inline or stand-alone basis. Features an increased number of tools in a magazine to accommodate multiple high-productivity processes and can flexibly meet the needs of divided or integrated processes.

  Maximum spindle speed	10,000 min-1
  Travel distance	X:500 mm Y:500 mm Z:630 mm
  Spindle taper	7/24 taper No. 40
  Numerical control device (NC)	FANUC 31i-MA

• MBN-455HN Heavy Machining Type

  

  Offers a balance between higher speed and heavier machining than the conventional #40 Machining Center. Similar to the MBN-450H, the MBN-455HN can easily be incorporated into a line to boost productivity and accommodate heavier machining and larger loads.

  Maximum spindle speed	12,000 min-1
  Travel distance	X:550 mm Y:450 mm Z:500 mm
  Spindle taper	7/24 taper No. 40
  Numerical control device (NC)	FANUC 31i-MA

#40 Vertical Machining Center (Inline Type/MBN-Series)

• MBN-460VQ1 Quill Type

  

  A global standard machining center achieves a high utilization rate because it reduces failures caused by grinding swarf. Its vertical configuration enables it to accommodate standard gantries for safe and secure operations.

  Maximum spindle speed	12,000 min-1
  Travel distance	X:600 mm Y:500 mm Z:500 mm
  Spindle taper	7/24 taper No. 40
  Numerical control device (NC)	FANUC 0i-MD

#30 Vertical Machining Center (Inline Type/MBN-Series)

• MBN-350VCT1K #30 Standard Type

  

  The #30 Standard Type Machining Center achieves a high utilization rate because it reduces failures caused by grinding swarf.

  Maximum spindle speed	10,000 min-1
  Travel distance	X:500 mm Y:400 mm Z:400 mm
  Spindle taper	7/24 taper No. 30
  Numerical control device (NC)	FANUC 0i-MD

#30 Horizontal Machining Center (Inline Type/MBN-Series)

• MBN-350Hα Standard Type

  

  Offers the same high-value-added machining of the #40 Machining Center in the body of a #30 Machining Center.

  Maximum spindle speed	10,000 min-1
  Travel distance	X:500 mm Y:400 mm Z:500 mm
  Spindle taper	7/24 taper No. 30
  Numerical control device (NC)	FANUC 31i-MA

#30 Vertical Machining Center (General Purpose Machining Center/KIWAMI Series)

• MKN-335VT

  

  Delivers maximum performance in high-precision machining of small parts. Traverse type enables high productivity.

  Maximum spindle speed	22,000 min-1
  Travel distance	X:350 mm Y:200+100(Unload) mm Z:250+80(ATC) mm
  Spindle taper	7/24 taper No. 30
  Numerical control device (NC)	MITSUBISHI M70VB

• MKN-335VCJ

  

  The undisputed machine in high-precision machining of small parts. Mounted with a jig changer that can enhance the productivity.

  Maximum spindle speed	22,000 min-1
  Travel distance	X:350 mm Y:220 mm Z:250+80(ATC) mm
  Spindle taper	7/24 taper No. 30
  Numerical control device (NC)	MITSUBISHI M70VA

#30 Vertical Machining Center (Inline Type/KIWAMI Series)

• MKN-350VT/370VT

  

  Inline type machining center for aluminum parts used in automobiles and motorcycles. Compared to the #40 Machining Center, this model can significantly reduce a production line's initial and running costs.

  Maximum spindle speed	10,000 min-1
  Travel distance	X:500(700) mm Y:400 mm Z:320+80(ATC) mm
  Spindle taper	7/24 taper No. 30
  Numerical control device (NC)	FANUC 0i-MD

• MKN-355VCJ

  

  A fully evolved machining center with jig changer that can challenge the extremes of machining. Its wide range of machining capabilities makes it possible to handle even large automotive parts.

  Maximum spindle speed	10,000 min-1
  Travel distance	X:550 mm Y:320 mm Z:320+80(ATC) mm
  Spindle taper	7/24 taper No. 30
  Numerical control device (NC)	FANUC 31i-MA

• MKN-TS335VT

  

  #30 Vertical Twin Spindle Machining Center
  High productivity by Twin Spindle.

  Spindle speed	10,000 min-1
  Travel	X:350mm Y:400mm Z:450mm
  Spindle taper	7/24 taper No.30
  Spindle pitch	350mm
  NC specification	FANUC 0i-MF

#15 Vertical Machining Center (General Purpose Machining Center/KIWAMI Series)

• MKN-115VT High Spindle Speed Type

  

  Offers ultra-compact, high-speed and high-precision machining of small parts such as the base plate of hard disk drive (HDD) and others.

  Maximum spindle speed	20,000 min-1
  Travel distance	X:150 mm Y:150+50 mm Z:150 or 200+50 mm
  Spindle taper	7/24 taper No. 15
  Numerical control device (NC)	MITSUBISHI M70VB

• MKN-135VT Wide Stroke Type

  

  An ultra-high speed, wide-stroke-type machining center that can machine small parts in a number of ways with high precision.

  Maximum spindle speed	20,000 min-1
  Travel distance	X:350 mm Y:200+100 mm Z:200+50 mm
  Spindle taper	7/24 taper No. 15
  Numerical control device (NC)	MITSUBISHI M70VB